10 GbE Gateway
(sRB-20210G Module) User Manual
Version 2.0
127
Mellanox Technologies
To connect 10 GbE Gateway Ports to the VLAN:
Step 1
Under the
Site Topology
Map View
select a switch.
Step 2
Under the
Internal Structure
(dynamic right panel), select the desired sRB-20210G and
expand it.
Step 3
Scroll all the way down to 10 GbE Gateway and expand it.
Step 4
Right-click the desired
10 GbE10 GbE
port that you want to attach to a partition. The 10 GbE
Gateway ports can only be selected individually.
Figure
13-9. Selecting the Port of an 10 GbE Gateway
NOTE:
In Full LAG mode:
If the 10 GbE Gateway is set to Full LAG mode, both 10 GbE Gateway ports are attached.
In No LAG mode:
If working in no LAG mode, you can only set the specific 10 GbE Gateway port (Port 1 or
Port 2) to the VLAN tag.
Step 5
From the right-click menu, select
Partitioning
. The
Port Info
window appears displaying on
top the Partitioning tab (see Figure
