Version 2.0
Command Line Interface (CLI) Management
142
Mellanox Technologies
Table
14-2. Basic Commands
Command
Description
add
Adds configuration to a previously created entity.
remove
Deletes selected entities that were created or added.
set
Sets various parameters of a created entity.
show
Displays configuration and operational data.
Table
14-3. Other Operational Commands
Command
Description
exit
Leaves current mode and returns to previous mode.
?
Displays help text for the CLI command.
<command> ?
Displays the help for the specific command.
end
Ends the CLI.
NOTE:
When the sRB-20210G CLI syntax defines parameters in brackets [], you must include at
least one of the parameters in the command.
14.3.3
Case-Sensitivity
CLI commands must be entered using the same case as shown in this manual. User-defined
strings, such as names or descriptions, may appear in any case, including mixed case. Case
information for user-defined strings is preserved in the configuration.
14.3.4
CLI Modes
There are three CLI usage modes for the sRB-20210G: Exec, Privileged, and Configuration.
Some modes are password-protected and can be accessed from other mode levels. A Debug
mode is included for Mellanox internal use only. Each mode is easily recognized by the
command line prompt.
The CLI command prompt includes the sRB-20210G (10G) system name. An asterisk is added
to the beginning of the prompt if the system configuration has been modified but not saved.
NOTE:
The default prompt for the sRB-20210G in the CLI is sRB-20210G-[BoxID], where the four
last bytes [BoxID] are unique.
