Version 2.0
Device Configuration
44
Mellanox Technologies
Chapter 5.
Device Configuration
This chapter describes the device configuration that can be performed using the
Device Manager, which includes IP Settings, Remote Management Settings, and User
Settings.
Refer to
Chapter 2 for information on
Initial System Configuration for Management
and
detailed instructions how to set up your system for Management.
5.1
IP Settings
5.1.1
Overview
The GridVision Device Manager (VDM) allows you to configure the sRB-20210G so that it
can be managed by the switch, either through the Ethernet or through InfiniBand. This
includes IP settings, remote management settings, user settings, setting remote configuration
(SNMP).
5.1.2
Setting the I/O IP via the GUI
The I/O Panel window is used to configure the I/O IP on the switch side. It shows the type of
I/O installed in the switch drawer slots.
The slot number is the number on the Grid Director rear panel in which the sRB-20210G is
installed within the switch. It also shows the sRB-20210G IP and mask.
To change/set the IP of the sRB-20210G:
Step 1
Under the Main Menu, select
Device
I/O Panel
. The
I/O Panel
dialog box is displayed.
Figure
5-1. I/O Panel Dialog Box
Step 2
In the
I/O Panel
table, right-click the desired gateway (row) and select
Change IP Address
.
The following dialog box is displayed.
