Version 2.0
Mellanox Device Manager (VDM)
32
Mellanox Technologies
3.4.4.2
Right-Clicking InfiniBand Ports
Figure
3-10. sRB-20210G InfiniBand Port Right-Click Menu
Port Counters
InfiniBand Ports only - Right-clicking a port on an sRB-20210G allows you
to select the port counters feature providing port counters information and
a graph of the port counters (see Section
10.2 for more information).
Enable Port or
Disable Port
Allows you to enable or disable an InfiniBand port. When the port is
enabled, you can only see the disable option. When the port is disabled,
you can only see the enable option.
3.4.4.3
Right-Clicking 10 GbE Ports (Gray Area)
The two 10 GbE Ports are confined into a gray area onto the sRB-20210G board.
Right-clicking this area allows you to choose from the following options:
Figure
3-11. sRB-20210G 10 GbE Port Right-Click Menu
Remote
Management
Settings
The Remote Management Settings window enables you to set the
SNMP Manager path in the SNMP tab, and to provide general details
for the Remote Management Setting via the General tab. (See
Section
6.2 for further information).
Remote
Configuration
Allows you to access the Remote Configuration window in which you
can set the FTP/SCP parameters. This procedure is identical to the
one performed on the Switch (refer to Section
6.3 for further
information).
Link Aggregation
Configuration
Opens the Link Aggregation Configuration window which enables you
to set LAG modes (FULL 1-2 or no LAG); refer to Section
6.4 for
further information).
Cluster
Configuration
Opens the Cluster Configuration window (refer to Section
6.6 for
further information).
Policy Table
Opens the Policy Table dialog box.
Port Configuration
Opens the Port Configuration dialog box.
About
Opens the Version Information dialog box (refer to Section
4.7 for
further information).
