10 GbE Gateway
(sRB-20210G Module) User Manual
Version 2.0
99
Mellanox Technologies
Table
9-1. Static Route Table Parameters
Parameter
Description
#
The row number matching this rule.
Destination
destination subnet
Netmask
destination subnet Netmask
Gateway
IP or IB gateway through which the traffic is transferred
Interface
Logical name (alias) of the interface that the user defined in the Interface
table. Note that
smb-mng
is the management interface and if0 is the default
interface.
To add a Static Route entry to the Static Route Table:
Step 1
Right-click the Static Route table and select
add static route
from the menu. The
Add Static
Route
dialog box opens. The gateway must be on the same subnet as the interface.
Figure
9-2. Adding a Static Route Dialog Box
Step 2
In the row field enter the row number (rule number) to set the priority in the table for the new
rule (you can edit the field manually or use the arrows).
Step 3
Enter the destination subnet, the destination subnet IP matching this rule, and the gateway
through which the traffic is transferred.
Step 4
From the drop-down menu, select the desired Interface for which you would like to set the
static route (the interface is what you have previously defined in the system).
Step 5
Click
Apply
and then
OK
to save your changes.
