Version 2.0
Command Line Interface (CLI) Management
168
Mellanox Technologies
active node table
-------------------
pkey vlan master-s/n router-s/n router-prio if-name router name advertised ip
0x7fff 0 0x62880 0x62880 100 if0 35_ipr 175.123.34.0
0x11 11 0x62880 0x62880 100 192.28.1. 31 35_ipr 172.28.1.6
14.6.2
Diagnostics
The commands available under the Diagnostics menu are listed below.
sRB-20210G-61f0(config-diagnostics)# ?
<command> ? Displays the command usage string.
? Displays the list of available commands.
end Ends the CLI.
exit Exits to previous menu.
system-utilization show Displays the system memory and CPU
utilization.
system-utilization show
Description:
Displays the system memory and CPU utilization.
Syntax:
system-utilization show
Example:
sRB-20210G-61f0(config-diagnostics)# system-utilization show
Total memory : 235916 kbytes.
Free memory : 58056 kbytes.
Memory utilization : 24.61%.
CPU idle : 99%.
14.6.3
Interface Options
The Interface menu enables you to configure interfaces and set the LAG Mode.
A list of the commands available under the Interface Mode is listed below.
sRB-20210G-61f0(config)# interface
sRB-20210G-61f0(config-if)# ?
<command> ? Displays the command usage string.
? Display the list of available commands.
end Ends the CLI.
exit Exits to previous menu.
interface add Interface add.
interface remove Interface remove.
interface show Displays the details of all interfaces, or an
interface.
interface vlan set Updates the VLAN of an interface.
ip-address set Sets the interface IP address.
lag-mode set Sets the LAG mode.
lag-mode show Shows the LAG mode.
