Version 2.0
Command Line Interface (CLI) Management
164
Mellanox Technologies
Syntax:
cluster join [yes,no]
Example:
sRB-20210G-61f0(config-cluster)# cluster join yes
Expected results:
sRB-20210G-61f0(config-cluster)# cluster show
cluster configuration
-----------------------
mode : enable
loop prevention : full
priority : 100
join cluster automatically : yes
load balancing algorithm : active-active
hash table algorithm : xor-infiniband-eth
multicast ip address : 224.0.0.77
cluster id : 1
active node table
-------------------
pkey vlan master-s/n router-s/n router-prio if-name router name advertised ip
0x7fff 0 0x62880 0x62880 100 if0 sRB-20210G-61f0 192.168.2.2
0x112 112 0x62880 0x62880 100 CP1 sRB-20210G-61f0 12.11.11.11
0x75 75 0x62880 0x62880 100 net75 sRB-20210G-61f0 75.75.75.75
0x103 2 0x62880 0x62880 100 CP2 sRB-20210G-61f0 13.11.11.2
cluster join-now
Description:
Allows the user to manually add the gateway to the cluster (if the
gateway is in manual join mode).
Syntax:
cluster join-now
Example:
sRB-20210G-61f0(config-cluster)# cluster join-now
cluster load-balance-algorithm set
Description:
Sets the load balancing algorithm [active-active, master-standby]
The traffic can be balanced between the sRB-20210G according to the
load balancing algorithm.
Options: active-active, master-standby
Default: active-active
active-active
– means that all sRB-20210G in the cluster transfer
packets
master-standby
– means that only the master sRB-20210G in the
cluster transfers packets, the others are in Standby Mode.
Syntax:
cluster load-balance-algorithm set [active-active,
master-standby]
Example:
sRB-20210G-61f0(config-cluster)# cluster load-balance-algorithm set
