Version 2.0
Device Information
40
Mellanox Technologies
10 GbE port 2 is enabled, copper type, and is down.
To change the port status (enable/disable):
10G(config-port)# port ethernet set [1..2] [disable,enable]
Example:
10G(config-port)# port ethernet set 1 disable.
4.3
sRB-20210G Port Information
To view the sRB-20210G Port Information Area:
Step 1
In the VDM Main Window, click Rear. The rear of the Switch is displayed, showing the
sRB-20210G installed in the chassis, as shown in Figure
Step 2
Click a port on the sRB-20210G. The port Information area (right panel) shows the specific
port information. Clicking an InfiniBand port displays the InfiniBand port information. If you
click the 10 GbE port, the right panel displays the 10 GbE port information.
Figure
4-3. Port Information Area (Right Panel)
The following table details the fields in the Port Information area.
Table
4-4. Device Information
Port
Description
Port Type
Displays the port type: Optic, Copper, or IB port.
Port Status
Shows whether the port is Up (active) or Down.
