10 GbE Gateway
(sRB-20210G Module) User Manual
Version 2.0
163
Mellanox Technologies
cluster priority set cluster priority set [priority
[0-255]]
cluster id set cluster id set [ID [0-255]]
cluster show cluster show
cluster mode set cluster mode set [disable, enable]
cluster box-id set cluster box-id set [box ID 0x0
–
0xffffff]
The following details the commands available under the Cluster Menu:
cluster hash-table-algorithm set
Description:
Sets the cluster hash-table-algorithm set. In active-active mode, the
load balancing is performed according to the Hash Algorithm (xor IB
eth, IB, Eth).
xor IB eth (Default)
– mathematical operation performed between
InfiniBand and Ethernet IP addresses.
IB
– IP address of the InfiniBand Host for any Ethernet address
Ethernet IP address of the Ethernet Host for any InfiniBand address.
Syntax:
cluster hash-table-algorithm set
[xor-infiniband-eth,infiniband,ethernet]
Example:
sRB-20210G-61f0(config-cluster)# cluster hash-table-algorithm set
infiniband
This change will take effect after reboot.
Expected results:
sRB-20210G-61f0(config-cluster)# cluster show
cluster configuration
-----------------------
mode : enable
loop prevention : full
priority : 100
join cluster automatically : yes
load balancing algorithm : active-active
hash table algorithm : infiniband
multicast ip address : 224.0.0.77
cluster id : 1
active node table
-------------------
pkey vlan master-s/n router-s/n router-prio if-name router name advertised ip
0x7fff 0 0x62880 0x62880 100 if0 sRB-20210G-61f0 192.168.2.2
cluster join
Description:
Allows the gateway to automatically join the cluster in active-active
mode. In manual mode, the gateway will not join the cluster until the
command is issued.
