23
Espa
ñol
En
gl
is
h
Deutsch
Anexo/Appe
ndix
Language settings
Display Menu
Select a language for the Setup menu and on-screen display.
Disc Menu/Audio/Subtitle
Select a language for the Menu/Audio/Subtitle.
[Original]
:
Refers to the original language in which the disc was recorded.
[Others]
:
To select another language, press number buttons then
OK
to enter the corresponding 4-
digit number according to the language code list in the appendix. If you make a mistake
while entering number, press
CLEAR
to delete numbers.
[OFF]
(for Disc Subtitle): Turn off Subtitle.
Audio settings
Dolby Digital / DTS / MPEG
Select the type of digital audio signal when using the DIGITAL AUDIO OUTPUT jack.
[Bitstream]
Select this when you connect this unit’s DIGITAL AUDIO OUTPUT jack to an audio
component with a built-in Dolby Digital, DTS or MPEG decoder.
[PCM]
(for Dolby Digital / MPEG) – Select this when you connect this unit’s DIGITAL AUDIO
OUTPUT jack to an audio component without a built-in Dolby Digital or MPEG decoder.
[Off]
(for DTS) – Select this when you connect this unit’s DIGITAL AUDIO OUTPUT jack to an
audio component without a built-in DTS decoder.
Sample Freq. (Frequency)
Select the sampling frequency of the audio signal.
[48 kHz]
:
In case of DVD with 96KHz sampling, the output is converted to 48kHz. If your receiver or
amplifier is NOT capable of handling 96 kHz signals, select
[48 kHz]
.
[96 kHz]
:
The digital audio signals are output in their original format.
DRC (Dynamic Range Control)
Make the sound clear when the volume is turned down (Dolby Digital only). Set to
[On]
for this effect.
