22
[Add Channel]
:
Press v V to select the channel and press OK to add the selected channel.
[Edit]
:
Displays the screen which show preset channel list and channel editing options. (page 18)
Clock Set
The clock must be set in order to use
[Timer record]
.
[Auto]
:
Set the channel that broadcasts a clock signal and the clock will be set automatically.
[Manual]
:
If there is no channel that broadcasts a clock signal in your area, you can set the time and
date manually.
TV Aspect
Select the aspects ratio of the connected TV.
[4:3 Letter Box]
: Select this when connecting to a standard 4:3 screen TV and prefer the wide picture with
bands on the upper and lower portions of the screen.
[4:3 Pan Scan]
:
Select this when connecting to a standard 4:3 screen TV and prefer the wide picture on
the entire screen cuts off the portions that do not fit.
[16:9 Wide]
:
Select this when connecting to a wide-screen TV.
AV2 Connection
You can connect a decoder or the other device to the AV2(DECODER) jack on the rear panel.
[Decoder]
:
Select this when you connect a PAY-TV or Canal Plus decoder to the AV2(DECODER) jack
on the unit.
[Others]
:
Select this when you connect a VCR or similar recording device to the AV2(DECODER) jack
on the unit.
Video output format
Select an option according to the TV connection type.
[YPbPr]
:
When your TV is connected to the COMPONENT OUTPUT jacks on the unit.
[RGB]
:
When your TV is connected to the SCART jack on the unit.
Power Save mode
With this option you selct if the unit switchs to power save mode or turns off completely. This option is not
available when a timer recording is set.
[ON]
*:
The front panel display is off and only signals arriving at the antenna input are passed
through when the unit is turned off.
[OFF]
:
Turns off the [Power Save Mode].
*:
If you turn off the unit while receiving encoded signals, the power save mode does not work.
Initialization
You can reset the unit to its original factory settings and format the HDD.
[Factory Set]
:
You can reset the unit to all its factory settings. Some options cannot be reset (Rating,
Password, and Area Code). The auto setup menu appears on the screen after the factory
settings.
[HDD format]
:
Everything recorded on the HDD will be erased.
