12
Initial Startup
Read the safety instructions thoroughly before connecting the device page 4.
Inserting the batteries
Two 1,5 V batteries (size AAA/LR03) are supplied for the remote control.
Open the battery compartment by sliding the panel on the back of the remote control in the direction of the
arrow.
Insert the batteries so that the negative end is placed next to the springs.
Close the battery compartment.
Remove the batteries from the remote control if it is not to be used for a longer period. There is an
increased risk of leakage.
Connections
a Antenna
connection
Connect the Terrestrial TV antenna to the ANTENNA IN jack on the unit.
b Antenna connection to your TV
Connect one end of the RF cable to ANTENNA OUT jack on the unit and other end to ANTENNA IN jack on
your TV.
Pass the signal from the ANTENNA IN jack to your TV/monitor.
c SCART
connection
Connect one end of the scart cable into the AV1 SCART jack on the unit and other end to the corresponding
in jack on your TV.
You can get Audio and Video signals together with this connection.
d Power
cord
connection
Connect the mains lead to the AC IN terminal on the unit. Then plug the power cord into the mains.
