15
Espa
ñol
En
gl
is
h
Deutsch
Anexo/Appe
ndix
•
When you connect an HDMI or DVI compatible device make sure of the followings:
- Try switching off the HDMI/DVI device and this unit. Next, switch on the HDMI/DVI device and leave it for
around 30 seconds, then switch on this unit.
- The connected device’s video input is set correctly for this unit.
- The connected device is compatible with 720(1440)x576i, 720x576p, 1280x720p, 1920x1080i or
1920x1080p video input.
•
Not all HDCP-compatible DVI devices will work with this unit.
- The picture will not be displayed properly with non-HDCP device.
Connecting a PAY-TV/Canal Plus Decoder
You can watch or record PAY-TV/Canal Plus programmes if you connect a decoder (not supplied) to the unit.
Disconnect the unit’s mains lead from the mains when connecting the decoder. You do not need to turn on the
unit to view the signals from the connected tuner on your TV.
To watch or record PAY-TV/Canal Plus programmes, set
[AV2
Connection]
option to
[Decoder]
(see page 22) and set the
program’s
[CANAL]
option to
[On]
on the Setup menu (page 18).
If you disconnect the unit’s mains lead, you will not be able to view
the signals from the connected decoder.
Connecting to the AV2 DECODER jack
Connect a VCR or similar recording device to the AV2 DECODER jack of this unit. You do not need to turn on the
unit to view the signals from the connected tuner on your TV.
To watch or record the source from AV2 DECODER jack, set
[AV2
Connection]
option to
[Others]
(see page 22) and set
[AV2
Recording]
option to
[Auto]
,
[CVBS]
,
[RGB]
or
[S-Video]
as
required (see page 25).
•
Pictures containing copy protection signals that prohibit any copying cannot be recorded.
•
If you pass the unit signals via the VCR, you may not receive a clear image on your TV screen. Be sure to
connect your VCR to the unit and your TV in the order shown below. To watch video tapes, watch the tapes
through a second line input on your TV.