manualshive.com logo in svg

MD Helicopters 369-500, Maintenance Instructions Manual

The MD Helicopters 369-500 Maintenance Instructions Manual is a comprehensive guide for maintaining and troubleshooting your aircraft. This invaluable manual ensures smooth operations and enhances safety. Download it for free from manualshive.com and empower yourself with all the necessary information to keep your helicopter in excellent condition.

Share
Download
background image

CSP-HMI-3

MD Helicopters, Inc

.

MAINTENANCE MANUAL

[ Main Menu ]

 

[ HMI

−

3 Book TOC ]

[ Chapter 97 TOC ]

97-08-00

Page 203

Revision 12

The information disclosed herein is proprietary to MD Helicopters, Inc.

Neither this document nor any part hereof may be reproduced or transferred to 

other documents or used or disclosed to others for manufacturing or any other 

purpose except as specifically authorized in writing by MD Helicopters, Inc.

Copyright 

©

 1999

−

2016 by MD Helicopters, Inc.

G97-0801-1

MICROPHONE

SCREW

WASHER

HOLDER

(NOTE 1)

SCREW

 (NOTE 2)

-17

-19

-15

GROMME
T

SUPPORT

NUT

WIRE HARNESS ASSEMBLIES

RIVET

NUTPLATE

WASHER

SCREW

CONTROL UNIT

CONTROL UNIT ATTACHMENT

INSTRUMENT PANEL

LOWER CIRCUIT BREAKER
AND SWITCH PANEL

CB129

NOTES:

 

1.

MICROPHONE AND HOLDER ARE PROVIDED 
AS A UNIT. 

2.

ATTACHMENT SCREWS ARE SUPPLIED 
WITH CONTROL UNIT. 

3.

ATTACHMENT BOLTS ARE SUPPLIED WITH 
AMPLIFIER. 

4.

EXISTING RIVET HOLES.

Figure 201.  Public Address and Siren System (Sheet 1 of 2)

Summary of Contents for 369-500



















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 369-500

Lionel Midwest FreightReady-to-Run Set Owner'S Manual preview
Midwest FreightReady-to-Run Set
Brand: Lionel Pages: 16
Step2 Little Helper’s Cart & Shopping Set 4862 Quick Start Manual preview
Little Helper’s Cart & Shopping Set 4862
Brand: Step2 Pages: 4
Zapf Creation Baby Robin Manual preview
Baby Robin
Brand: Zapf Creation Pages: 56
GAME OF BRICKS 76193 Instruction Manual preview
76193
Brand: GAME OF BRICKS Pages: 32
Omegon Universe2go Instructions Manual preview
Universe2go
Brand: Omegon Pages: 134
Kayoba 960-500 User Instructions preview
960-500
Brand: Kayoba Pages: 21
Enabling Devices St. Bernard Puppy User Manual preview
St. Bernard Puppy
Brand: Enabling Devices Pages: 2
H-KING A-1 SKYRAIDER Instruction Manual preview
A-1 SKYRAIDER
Brand: H-KING Pages: 13
CYmodel Spitfire MK IX Instruction Manual preview
Spitfire MK IX
Brand: CYmodel Pages: 10
GRAUPNER anja sl 35 User Manual preview
anja sl 35
Brand: GRAUPNER Pages: 36
marklin 37675 Instruction Manual preview
37675
Brand: marklin Pages: 32
pitsco 41427 Builder'S Manual preview
41427
Brand: pitsco Pages: 162
Naomi Kids Canopy Doll Bed Assembly Instructions Manual preview
Canopy Doll Bed
Brand: Naomi Kids Pages: 8
SAB Heli Division GOBLIN KRAKEN NITRO 580 Manual preview
GOBLIN KRAKEN NITRO 580
Brand: SAB Heli Division Pages: 48
REVELL 04363-0389 Assembly Manual preview
04363-0389
Brand: REVELL Pages: 12
Faller 190078/3 Manual preview
190078/3
Brand: Faller Pages: 4
Trix 22227 Manual preview
22227
Brand: Trix Pages: 28
E-FLITE Mini Pulse XT PNP Assembly Manual preview
Mini Pulse XT PNP
Brand: E-FLITE Pages: 20

Brands by name

Popular brands

Load more brands