MD Helicopters 369-500, Maintenance Instructions Manual

Page: 476 / 722

CSP-HMI-3
MD Helicopters, Inc
.
MAINTENANCE MANUAL
[ Main Menu ]
[ HMI − 3 Book TOC ]
[ Chapter 96 TOC ]
Page 204
Revision 14
96-10-00
The information disclosed herein is proprietary to MD Helicopters, Inc.
Neither this document nor any part hereof may be reproduced or transferred to
other documents or used or disclosed to others for manufacturing or any other
purpose except as specifically authorized in writing by MD Helicopters, Inc.
Copyright
©
1999 − 2016 by MD Helicopters, Inc.
CONNECTOR
VOLTAGE
TEST JACKS
CONNECTOR
ADJUSTMENT
SCREW COVER
VOLTAGE
ADJUST
GENERATOR CONTROL UNIT
(369D24284-BSC)
369E 384 - 508
369FF 076 - 091
500N 001 - 044
G96-1001F
CURRENT LIMIT SWITCH
(NOTE)
VOLTAGE ADJUST
NOTE:
ADJUST CURRENT LIMIT SWITCH TO MATCH THE INSTALLED
GENERATOR PRIOR TO INSTALLING GENERATOR CONTROL UNIT
POSITION 1
NOT USED
POSITION 2 LUCAS OR APC 200AMP START/GEN
POSITION 3 LUCAS OR APC 150AMP START/GEN
POSITION 4 NOT USED
369D24284-3
369E 509 - 537
369FF 092 - 128
500N 045 - 083
369D24284-5
369E 538 AND SUBS
369FF 129 AND SUBS
500N 084 AND SUBS
600N 001 AND SUBS
GENERATOR CONTROL UNIT
4
3
2
1
VOLTAGE REGULATOR
RELAYS FOR GCU ADJUSTMENT
E5
AS301 SHUNT
TERMIAL 1
Figure 202. Voltage Regulation and GCU Components