MTS600 Instruction Manual
8
1.2 Take out the instrument from the case and put it back.
Take out the instrument from the carrying case
①
Lays down the instrument carrying case with lid up.
②
Unlock the case and open it.
③
Take out the instrument from the case with care.
Put instrument back to the case
①
Cover lens of the telescope with the lid.
②
Make the instrument horizontal with vertical brake handwheel and circular
bubble face up. And objective lens face down. Put the instrument back to the
case.
③
Close the case and lock it.
1.3 Using the battery
1.3.1 Cautions
l
When the instrument is working on , don
’
t remove the battery.
l
Before removing the battery, turn off the power to the instrument.
l
When installing/removing the battery, make sure that moisture or dust particles
do not come in contact with the inside of the instrument.
l
Periodically wipe clean the pole with the cleaning cloth to keep them free of
dirt.
l
Please charge the battery at this temperature range 0
℃
~45
℃
.
l
Before storing the battery, you should charge it full, and you should charge it
every three months at least. If not doing so, the battery will discharge by itself,
and the voltage will be very low. Life of the battery will be affected.
l
The temperature and the humidity will affect the battery discharge speed. So
we advice you store the battery in a dry room and the temperature range should
be 0
℃
~20
℃
.
1.3.2 Charging procedure
①
Connect the charger connector to the battery. Make sure the battery contact the
charger well.
