MTS600 Instruction Manual
75
④
Press [ESC] to return.
10.3 Define function of the USER key
For convenience of user, there is a function key named [USER] on panel of
MTS-600, user can define the function that often used to the key. After power on,
pressing [USER] key directly can enter the function quickly.
The following functions can be defined to the [USER] key:
(1)
Meas/Rec data
: in basic measurement mode
（
angle, distance, coordinate
measurement
）
measure and recorde data.
(2)
View JOB
: review data stored in the current JOB.
(3)
Send data
: send JOB data in instrument
‘
s memory to PC.
(4)
Receive data
: receive known coordinate data from PC.
(5)
Input coord.
: input and record known coordinate data.
(6)
Input code
: input and record codes.
(7)
Resection
: enter the program of resection measurement.
(8)
Offset-meas
: enter the program of offset measurement.
(9)
MLM
: enter the program of missing line measurement(MLM).
(10)
REM
: enter the program of remote elevation measurement(REM).
(11)
Area calcul.
: enter the program of area calculation.
(12)
Instr. setting
: set the parameters of instrument.
Operation of defining function is the same as described in "10.2 Operation of
setting parameters".
l
Default function defined by factory is "Meas/Rec data".
l
Please see details of these function in previous chapter.
Parama Setting <5/6>
F1-Temperature unit
F2-Pressure unit
F3-Auto power off
