MTS600 Instruction Manual
36
①
In
<
Select S-O Mode
>
menu, press [F2] to
select "S-O Coordinate".
②
In
<
S-O Coordinate
>
menu, press [F1] to select
"
Station data
"
,input the station
coordinate and the height of instrument. Please see "4.3 coordinate measurement".
l
If instrument station has been set up in the previous coordinate survey, this
step can be left out.
③
In menu
<
S-O Coordinate
>
, press [F2] to select
"
STN Orientation
",
set the
direction angle of the backsight point. Please see "4.3 coordinate measurement".
l
If direction angle has been set in the previous coordinate survey, this step
can be left out.
④
Press [F3] to select "Start S-O". Input
coordinates(Np,Ep,Zp) of the setting-out point, press
[S-O].
l
If setting-out plane coordinates only, Zp may
not be input.
l
Pressing [PT#] can get the setting-out point coordinate in memory by
inputting the setting-out point number. Please see "4.3 Coordinate
measurement/Reading in registered coordinate data".
l
Press [REC] to record the input coordinate data into memory .
⑤
Measure and enter the height of the prism, press
[OK].
l
If setting-out plane coordinates only, this step
can be left out.
⑥
Following the same steps mentioned in
“
5.1
Distance & Angle setting-out
”
, complete the plane
coordinates setting-out.
l
When the height of prism and instrument have
changed, press [HT] to input again.
S-O Coordinate <1/2>
F1
—
Station data
F2
—
STN Orientation
F3
—
Start S-O
Np(m)
：
Ep(m)
：
Zp(m)
：
PT#
REC
S-O
S-O Coordinate
Psm.ht(m)
：
0.000
OK
dHA 35
°
02
′
43
″
←
dHD
dHT
MODE
EDM
HT
DIFF
MEAS
