MTS600 Instruction Manual
28
②
Press F1 to select entering station data
③
Input the station coordinates, press [OK]
l
If only measuring plain coordinates of target
point, Z0 may not be input.
④
Input the instrument height, press [OK] to
complete setting up the station .
l
If only measuring plain coordinates of target
point , the instrument high may not be input.
l
When you wish to read in the registered coordinate data in the memory ,
press [READ]. See "Reading in registered coordinate data".
l
The entered station data remains until setting up station once more, even
when the power is cut off.
Reading in registered coordinate data
The coordinate data stored in the instrument memory can be read in, and set as
coordinates of station point, backsight point ,setting-out point and so on.
About the memory data managing, please see
“
7.
Memory management
”
.
Input the point number you want to search for and
press [OK], instrument will start searching the
selected file("Known Coord" by default) for the point .
If the point is found, the coordinates of the point will
be read in. Otherwise, the screen will display
“
PT#
does not exist
”
and quit.
l
Pressing [FILE] can select another coordinates
search file.
Example
：
Press [F2] in menu <Select A File> to
select the current JOB.
Note
: The current JOB is a JOB that instrument used
to store measurement data, it can be selected in
Memory management mode or in Recording data
N0(m)
：
0.000
E0(m)
：
0.000
Z0(m)
：
0.000
READ
REC
OK
Station data
Ins.ht(m)
：
0.000
OK
Search Coord.Data
PT#
：
PT-001
In file <Known Coord>
123/ABC
FILE
LIST
OK
Select A File <1/2>
F1-Knowm Coord
F2-Current JOB
F3-JOB List
Search Coord.Data
PT#
：
PT-001
In file <JOB MYJOB>
123/ABC
FILE
LIST
OK
