MTS600 Instruction Manual
53
③
Press [F3] to select
“
4800 bps
”
.
④
Press [ESC] to return to <Communication> menu.
l
The baud rate can be set in parameters setting
mode also, please see "10.Setting parameters of
instrument".
8.2 Send JOB data
①
Connect PC and MTS-600 with communication cable. Run the total station
communication program on PC, click
【
COMMUNICATION
】
,
【
RECEIVE
】
, set
the parameters of communication correctly, then click
【
OK
】
.
②
Press
[F1]
to
select
"Send
data"
in
<Communication> menu, the JOB list of memory is
displayed.
③
Press [
▲
] [
▼
], move cursor to the JOB that you
want to send, press [OK] to select the JOB, then
<Select data format> menu appears.
l
Point coord: Convert known point coordinate data,
coordinate measurement data, station data stored
in memory to simple format (point number, code, N, E, Z) .
l
Raw data
：
Raw measurement data stored in memory.
④
e.g. Press [F1] to select "Point coord", instrument
begin transferring the JOB data to PC.
l
Press [STOP] to stop the transferring.
⑤
When transferring complete, the JOB list screen is
restored. You can select and send next JOB.
Comms. Setting <1/2>
○
F1--1200 bps
○
F2--2400 bps
⊙
F3--4800 bps
Communication
F1-Send data
F2-Receive data
F3-Comms. setting
MYJOB 50
JOB001 128
*JOB002 285
↓
1X>>
TOP
LAST
SRCH
OK
Select Data Format
F1-Point coord
F2-Raw data
Comms./Send data
Sending JOB002...
Recs sended:
STOP
MYJOB 50
JOB001 128
*JOB002 285
↓
1X>>
TOP
LAST
SRCH
OK
