MTS600 Instruction Manual
72
10. Setting parameters of instrument
This section explains how to set parameters of instrument. The changed setting
remains until it is changed again, even when the power is cut off.
After power on, press [MENU] key on the panel to
enter the main menu of instrument, select "F2- Params
setting" in the second page of main menu to enter
parameters of instrument setting menu.
10.1 Items set and options
The items and their options list in the following table can be set in the parameters
setting mode. The option marked with
“
*
”
is factory setting.
Items
Options
Description
Angle
*Distance
Start-up mode
Coordinate
Select basic measurement mode after
power on.
*Off
Tilt correction
On
Select whether tilt angle compensation
function is enabled.
* 1
″
5
″
Min.ang.reading
10
″
Select the minimum display angle
reading
*Zenith
V.angle display
Vertical
Select vertical angle display for zenith 0
or Horizontal 0
SD+VA+HA
*HD+VA+HA
Dist.mode display
HD+VD+HA
Select prior display combination in the
distance measurement mode
Off
Signal-beep
*On
Select whether beep on once return
signal checked
*Off
K=0.14
Curv&Refr.correction
K=0.20
Select whether earth curvature and
refraction correction is enabled, and set
the refraction coefficient. Please see
details below.
*Off
Scale correction
On
Select whether distance scale correction
is carried out when calculating
coordinates, and input the scale factor.
Please see details below.
*N E Z
Coord.display
E N Z
Select order of coordinate display
Off
H.angle on-memory
*On
Select to retain presetting angle after
power off
Params Setting <1/6>
F1-Start-up mode
F2-Tilt correction
F3-Min.ang.reading
