MTS600 Instruction Manual
29
mode
l
Press [LIST] to list all point data in the selected
file and search for the required point.
Method of operating list
：
l
Press [
▲
] [
▼
] to move the cursor up and down from line to line;
l
[F1]([1X>>])is a speed-up key
，
it can be set that when pressing [
▲
] [
▼
] ,
cursor moves according to a line, one page, two pages, or three pages.(key
caption 3X>>,6X>>,9X>> )
l
Press [TOP] to move the cursor to the list
’
s beginning .
l
Press [LAST] to move the cursor to the list
’
s end.
l
Press [SRCH] to input the point number and search for it.
l
Press [OK] to select the record where the cursor locates.
(2) Direction angle setting
There
’
s two method of setting the direction angle of the backsight point: by
inputting the angle value directly or by calculating from input coordinates of the
backsight point .
In < Coord.Meas./Setup> menu, Press [F2] to select
“
STN
orientation
”
1 PT-001(CRD)
2 PT-002(CRD)
3 PT-003(DIS)
↓
1X>>
TOP
LAST
SRCH
OK
Select Orient.Method
F1-Input BS direc.ang
F2-Input BS pt.coord.
