MARUTI SUZUKI Wagon R, Manual

Page: 20 / 240

0A-3 General Information:
Wire Color Symbols
AENAR90A0101003
There are two kinds of colored wire used in this vehicle. One is single-colored wire and the other is dual-colored
(striped) wire.
The single-colored wire uses only one color symbol (i.e. “GRN”).
The dual-colored wire uses two color symbols (i.e. “GRN/YEL”). The first symbol represents the base color of the wire
(“GRN” in the figure) and the second symbol represents the color of the stripe (“YEL” in the figure).
Fasteners Information
AENAR90A0101004
Metric Fasteners
Most of the fasteners used for this vehicle are JIS-defined and ISO-defined metric fasteners. When replacing any
fasteners, it is most important that replacement fasteners be the correct diameter, thread pitch and strength.
CAUTION
!
Even when the nominal diameter (1) of thread is the same, the thread pitch (2) or the width across flats
(3) may vary between ISO and JIS. Refer to JIS-TO-ISO Main Fasteners Comparison Table below for the
difference.
Installing a mismatched bolt or nut will cause damage to the thread.
Before installing, check the thread pitch for correct matching and then tighten it by hand temporarily. If
it is tight, recheck the thread pitch.
Symbol Wire Color Symbol Wire Color
B BLK Black O, Or ORN Orange
Bl BLU Blue R RED Red
Br BRN Brown W WHT White
G GRN Green Y YEL Yellow
Gr GRY Gray P PNK Pink
Lbl LT BLU Light blue V PPL Violet
Lg LT GRN Light green
I2RH01010010-01