Marport Scala2, User Manual

Page: 72 / 177

Scala2 | Version 5 | Display Configuration
2. Ownship
It displays information relative to the ownship, such
as its position, its heading, the wind speed. This data
depends on devices connected to the system.
3. Mx
It displays the IP address of the receiver(s) and data
received from the sensors. Data can be raw or filtered.
By default, the location of the sensor on the trawl gear is
written between brackets next to the name of the sensor.
To know the location corresponding to the number, refer
to the pictures in
Sensor Nodes .
The shape of the lights changes according to data
received:
•
: data is stable
•
: data value is increasing
•
: data value is decreasing
To display raw data, connect in Expert Mode . Click the
menu next to the receiver IP address, then Show Raw
Data . Raw data are displayed under the filtered data. You
can drag them to a page the same way as for filtered
data.
| 71