Marport Scala2, User Manual

Page: 39 / 177

Scala2 | Version 5 | System Configuration
The echogram above has filtered data and echogram below has raw data.
You can see on the second echogram small red points or lines in the water column and
sea bottom that are interferences due to a noisy environment or to an echosounder. These
interferences are mostly removed when
Signal Interference Reduction filter is applied. The
Medium level of the filter means data are moderately smoothed.
Applying Filters
You can apply different types of filters on sensor's incoming data.
Procedure
1.
Click Menu > Expert Mode .
2. Enter the password
copernic
.
3. Right-click the IP address of the receiver at the bottom of the page, then click Configure
Receiver .
4. From the left side of the screen where the system is displayed, click a sensor, for example Trawl
Explorer.
5. In Sensor Options , click Configure next to Filter .
| 38