Marport Scala2, User Manual

Page: 133 / 177

Scala2 | Version 5 | Display Configuration
3.
To change the vessel 3D model, from the upper left corner of the screen click Menu >
Settings and click the Ownship tab.
4. To change the view, you can use the numeric keypad: press 5 to see the vessel from above, press
the digits around to make the vessel turn accordingly (2 being front view and 8 back view).
5. Right-click the 3D view and click Center on Ownship to focus on the vessel or Center on Trawl
to focus on the trawl.
What to do next
Deactivate the Customize mode when you have finished customizing pages: click Menu >
Customize again.
Displaying the Chart View
You can display the location and trajectory of the trawl behind the vessel if you receive GPS data
and have door positioning sensors.
Before you begin
• You must be in Customize mode to do this task.
You must have:
• Incoming GPS data and heading data.
• Spread or Slant Range sensors with bearing measurement
• Warp lengths or Slant Range sensors giving distance to vessel
Procedure
1. Open the customization panel, then go to Geographic .
2. Click + drag Chart to the page.
| 132