Marport Scala2, User Manual

Page: 48 / 177

Scala2 | Version 5 | System Configuration
b) Under the NMEA Outputs tab, click Add .
c) In Port Settings , select Serial port and enter a port name depending on your serial to
USB cable, such as cu.usbserial. Enter a baud rate between 4800 and 57600 (Olex will
automatically set the same rate if it is in Autoband mode).
d) In Data to Emit , select Emit only selected data types and deselect all the items. This is to
make sure Scala2 do not output these data. If you do not do this, Scala2 outputs all data and
this slows down Olex.
e) Select Emit trawl positioning sentence and click Best sentence for Olex ($PSIMS) .
6. PSIMS and PTSAL sentences are sent at the same time. This causes display issues on Olex, so
you need to disable PTSAL sentences from Olex:
a) From Olex, click Layers > Show data flow .
b) In the list of sentences, click PTSAL to disable it.
| 47