Marport Scala2, User Manual

Page: 120 / 177

Scala2 | Version 5 | Display Configuration
In this case, both clumps are out
of alignment.
Important: If you do not receive warp lengths, Scala2 is not able to show the correct
position of the clumps. By default, Scala2 will display the clumps in a static position out of
the alignment axis, closer to the vessel.
Using the MultiDepth View on Scala2
You can display a 3D view showing the trawl gear and the echogram images received from a Door
Sounder and Door Explorer.
Displaying the MultiDepth View
Before you begin
Go to Menu > Settings > Trawl , then select Auto to automatically detect the number of trawls
or select manually the type of trawl gear in use. If you change the trawl gear, change this setting
accordingly.
Procedure
1.
Click Menu > Customize and enter the password
eureka
.
2. Open the Customize panel on the left side of the screen, then drag MultiDepth to a page.
| 119