Marport Scala2, User Manual

Page: 116 / 177

Scala2 | Version 5 | Display Configuration
Settings
• Camera : change the viewing angle of the 3D view.
• Clump Spreads :
• Show distances : real values
of spread between two door
sensors.
• Show projections : calculated
values of linear spread
between door sensors. These
values have a yellow dot
instead of a green dot.
Note: Spread distances and projection distances should
be the same. If not, it means the doors or clumps are not
aligned.
• Time Ticks : select Show dates to show the current time on the
timescale or Show delays to show the time that has elapsed since
the trawl was put in water.
• Warp Labels : display the warp lengths received from a winch
control system or the slant distance received from a Duplex sensor.
• Door Gauges and Clump Gauges :
• Show roll gauges and Show pitch gauges : displays angular
gauges to help with door pitch and roll monitoring.
| 115