Marport Scala2, User Manual

Page: 93 / 177

Scala2 | Version 5 | Display Configuration
Displaying an Echogram
You can display an echogram view on a page.
Before you begin
You must be in Customize mode to do this task.
Procedure
1. Open the drawer on the right side of the screen to display the control panels.
2. In the control panels, click the Mx tab. Under the sensor's name, click then drag Sonar Data to a
page, where a yellow area appears.
Tip: You can change the source of an existing echogram by dragging the sonar data of
another sensor above it.
| 92