Marport Scala2, User Manual

Page: 21 / 177

Scala2 | Version 5 | System Configuration
System Configuration
Read this section to know how to configure a receiver, sensors and other devices to be able to
display their data in Scala2.
Configuring the System
You need to configure the different components of the system to display in Scala2 data received
from the sensors.
A system web page gives access to the receiver configuration. It is accessible through Scala2 or
Firefox web browser:
1.
Click Menu > Expert Mode .
2. In the following window, enter the password
copernic
.
3. Open the control panels and go to the Mx panel. Click the menu icon next to the name of the
receiver and click Configure Receiver . You can also right-click the IP address of the receiver on
the bottom of the page.
4. Or, enter the receiver IP address in Firefox web browser.
5. You can now configure the different components of the system.
Note: When you have finished changing settings, you need to deactivate the Expert mode:
click Menu > Expert Mode again.
Defining a Hydrophone
You need to add hydrophones to the system.
| 20