Marport Scala2, User Manual

Page: 67 / 177

Scala2 | Version 5 | System Configuration
Before you begin
• You must have Scala Full dongle.
• You need to have incoming data from a GPS (position, heading)
• You need to have specific GEBCO files. Ask your local Marport office to get them.
• GEBCO files use approximately 5.7 GB of space, make sure you have enough space on your
computer.
Procedure
1. You need to save GEBCO files according to a specific folder structure:
a)
Create a folder named Databases anywhere on the computer.
b) Create the following folder structure inside Databases and save the GEBCO files in the Gebco
folder.
Important: Make sure you write exactly the same names of folders (letter case, spaces).
2.
From Scala2, click Menu > Expert Mode and enter the password
copernic
.
3.
Click Menu > Settings .
4. Go to the Advanced tab, then click Browse in front of GEBCO Bathymetry Folder and select the
folder Databases you created.
| 66