MagneMotion MagneMover LITE, User Manual, Page: 307 / 382

Maintenance
Repair
MagneMover LITE User Manual 23
Rockwell Automation Publication MMI-UM002E-EN-P - March 2016
Repair
If a component of the MagneMover LITE transport system malfunctions, refer to Trouble-
shooting on page 7-13 in this manual for diagnostic procedures. If these procedures are not
adequate to determine the source of the problem, refer to Contact MagneMotion Technical
Support on page 7-22 . Once the failed unit has been identified, a replacement unit can be
ordered and installed as directed in Installation on page 5-1 .
NOTE: The components of the MagneMover LITE transport system are designed for easy
replacement. Motors, controllers, and other modules do not contain any user service-
able parts.
NOTICE
Only a qualified service representative can service the components of the
MagneMover LITE transport system. Any attempt to open the transport sys-
tem modules by anyone other than a qualified MagneMotion service repre-
sentative will void the warranty.
Table 7-10: MagneMover LITE Repair Procedures
Component Maintenance Action Page #
MagneMover LITE Trans-
port System Adjust G3 Motors to Eliminate Rail Binding 7-25
Connect and Secure G3 Motors and G3 Switches 7-27
Connect G3 Motors and G4 Motors 7-29
Replacing Motors 7-31
Programming Motors 7-33
Separating Magnet Arrays 7-34
Puck Replace Pucks 7-35
Replace Puck Wear Surfaces 7-38
Power Supply Replace Power Supply Fuses 7-42
Precision Rail Vehicles Replace Precision Rail Vehicles 7-45
Replacing Lubricating Applicators on Vehicles 7-50
Replacing Magnet Arrays On Precision Rail Vehi-
cles 7-53
Replacing Bearings On Precision Rail Vehicles 7-59