Maintenance
Repair
MagneMover LITE User Manual
27
Rockwell Automation Publication MMI-UM002E-EN-P - March 2016
Connect and Secure G3 Motors and G3 Switches
Once the MagneMover LITE G3 motors and switches are properly located, either after initial
installation or after maintenance or replacement, the rails must be aligned from motor to
motor (or switch).
Required Tools and Equipment
•
000-0600-00 – Rail Alignment Fixture, ML (G3 motors and G3 switches only).
•
Torque wrench with the following bits:
•
T30 Torx.
•
13 mm Hex socket.
•
Loctite 243, Thread locker, Anaerobic Adhesive, Blue.
Procedure
Figure 7-8: Align and Secure Rails – G3 Motors
1.
Stop all motion on the sections of the MagneMover LITE transport system to be ser-
viced.
2.
Loosen the M8 bolt securing the motor to the motor mount for all motors or switches
being adjusted.
M6 x 12 mm Screw
V-Brace
(2X per V-Brace)
Rail Alignment Fixture
M8 x 20 mm Bolt
(1X per Bracket)