MagneMotion MagneMover LITE, User Manual, Page: 54 / 382

Safety
Label Identification and Location
12 MagneMotion
Rockwell Automation Publication MMI-UM002E-EN-P - March 2016
Label Identification and Location
Safety labels and identification labels are placed on those MagneMover LITE components
that require them to provide operators and service personnel with hazard identification and
information about the MM LITE components at the point of use. This section describes each
label, identifies its location, and for safety labels gives instructions on how to avoid the haz-
ard.
NOTE: Label placement may cause labels to be visible only during maintenance operations.
The following tables list the labels that are affixed to the individual MagneMover LITE com-
ponents. These labels are used to alert personnel to hazards on or within the MM LITE com-
ponents and to provide information about the components. The figure after each table shows
the location of each label identified in the table. To replace a lost or damaged label, contact
MagneMotion and refer to its name.
Standard MagneMover LITE Components
Figure 2-4: Locations of Labels on the MagneMover LITE Straight and Curve Motors
Table 2-5: Labels Used on the MagneMover LITE Straight and Curve Motors
Product Information Label
Qty: 1
Location: On the bottom of the motor
AT
E
PU
CK
B-I
N
TES
TED
Information Label