manualshive.com logo in svg

MagneMotion MagneMover LITE, User Manual, Page: 317 / 382

Share
Download
MagneMotion MagneMover LITE User Manual Download Page 317

Maintenance

Repair

MagneMover LITE User Manual

33

Rockwell Automation Publication MMI-UM002E-EN-P - March 2016

Programming Motors

When a new MagneMover LITE motor is installed, either as part of a new system installation 
or as a replacement for an existing motor it must be programmed with the appropriate Motor 
ERF image (

motor_image

.erf).

NOTE:

MagneMover LITE motors are shipped from the factory with just a basic motor soft-
ware image installed. They must be programmed with the software supplied with the 
motors before use.

Required Tools and Equipment

•

Computer with an Ethernet port and a web browser.

•

Motor ERF Image Files.

Procedure

1.

Upload the motor ERF image files (

motor_image

.erf) to each Node Controller using 

the Node Controller Web Interface and program the motor masters and slaves. Refer to 
the 

Node Controller Web Interface User’s Manual

 for details.

2.

Reset the Paths where the motors were programmed (e.g., use the NCHost TCP Inter-
face Utility, refer to the 

NCHost TCP Interface Utility User’s Manual

 for details).

Summary of Contents for MagneMover LITE































































































































































































































































































































































































Reviews:

No comments