MagneMotion MagneMover LITE, User Manual, Page: 168 / 382

Specifications and Site Requirements
Electrical Specifications
50 MagneMotion
Rockwell Automation Publication MMI-UM002E-EN-P - March 2016
Figure 4-43: NC-12 Node Controller Electrical Connections and Indicators
Table 4-15: NC-12 Node Controller Connections
Label Description Connector Type
CONSOLE External terminal DE-9, Male
ETHERNET Ethernet – 10/100/1000 BaseTx RJ-45, Female, IP-67
*
* IP-67 mating connector is not required.
DIGITAL I/O Digital I/O, refer to Digital I/O Con-
nection on page 4-65
Spring-cage clamp
RS-232 RS-232 external communications DE-9, Male
RS-422 RS-422 motor communications M8 Nano-Mizer, 4-Pin, Male
†
† MagneMotion recommends that the odd number connectors be used for upstream connections and the even
number connectors be used for downstream connections.
POWER 22 - 30 VDC, 20 W DC Power Jack, 2.0 mm Coax, Male,
M12 Thread
Ground M6 threaded stud
‡
‡ MagneMotion requires grounding the NC-12 through the ground stud.
Table 4-16: NC-12 Node Controller Indicators
Label Description Indicator Type
PWR ON – Indicates DC power is on. Green LED
Ethernet
Console
RS-422 Digital I/O RS-232
Front View
Ground
Power
Indicator
DC Power