manualshive.com logo in svg

MagneMotion MagneMover LITE, User Manual, Page: 290 / 382

Share
Download
MagneMotion MagneMover LITE User Manual Download Page 290

Maintenance
Preventive Maintenance

6

MagneMotion

Rockwell Automation Publication MMI-UM002E-EN-P - March 2016

Transfer Log Files

The log files for each Node Controller and the High Level Controller should be reviewed peri-
odically to look for unexpected messages.

Log files may be transferred from the Node Controller or SysLog server to a CD or external 
USB device so they can be archived or e-mailed to MagneMotion Support, refer to the 

Node 

Controller Web Interface User’s Manual

.

Clean Power Supply Air Filter

1.

Turn off power to the MM LITE Power Supply.

NOTE:

The power supply should not be used when the filter is not installed.

2.

Visually inspect the air filter. If the filter needs to be cleaned, remove the filter from 
the power supply.

3.

Inspect the air filter for damage. If the filter is damaged, contact MagneMotion for a 
replacement.

4.

Clean the air filter using warm soapy water, rinse thoroughly with clean water, and let 
dry.

5.

Replace the air filter in the power supply.

6.

Return the power supply to normal operation.

Summary of Contents for MagneMover LITE































































































































































































































































































































































































Reviews:

No comments