Lightwave Research Status Cue, User Manual, Page: 78 / 348

3-4 Status Cue User’s Manual
7. Click the
OK
button to complete the procedure.
8. Repeat the above steps to add additional devices. Refer to Figure 3.4 for a
sample dialogue box.
Figure 3.4. MIDI Devices Dialogue Box
9. Click the close tab in the upper right hand corner to exit the dialogue box.
Removing MIDI Devices
To remove a MIDI device, complete the following procedure:
1. Select
MIDI Devices...
from the
Configure
drop-down menu. This brings up the
MIDI Devices
dialogue box.
2. Select a MIDI device to remove.
3. Click the
Remove Device
button to extract the device from the list.
Editing MIDI Devices
To edit an existing MIDI device, complete the following procedure:
1. Select
MIDI Devices...
from the
Configure
drop-down menu. This brings up the
MIDI Devices
dialogue box. Refer to Figure 3.4.
2. Select the MIDI device to edit.
3. Click the
Edit Device...
button to change the parameters of the device. This
brings up the
Edit a MIDI Device...
dialogue box. Refer to Figure 3.5.
Note: you may also double click the device to begin editing.