Lightwave Research Status Cue, User Manual, Page: 166 / 348

6-8 Status Cue User’s Manual
Copying and Pasting Fixture Constructs
To quick copy and paste a Construct parameters from one Step to another,
complete the following procedure.
1. Select the Step to copy from (source Step).
2. Select the fixtures to copy (source fixtures). Refer to "Selecting Fixtures"
on page 5-5.
3. Press the < COPY > key in the MEMORY group.
4. Select the Step to paste the Constructs to (destination Step).
5. Press the <
COPY
> key in the MEMORY group. This brings up the
Paste
Selected Fixture(s) dialogue box. The Steps’ names will appear in the
dialogue box. Refer to Figure 6.7.
Figure 6.7. Paste Selected Fixture(s) Dialogue Box
6. Press the < ENTER > key or the < CANCEL > key in CONTROL group.
Alternately, use the mouse and click OK or Cancel .
Cutting, Copying, and Pasting Steps
To cut, copy, or paste a Step, complete the following procedure:
1. Select the Step(s) to copy by clicking it.
2. Select either
Cut
or
Copy
from the
Edit
drop-down menu.
3. Select a Step to place the Step (in memory) before.
4. Select
Paste
from the
Edit
drop-down menu.