Lightwave Research Status Cue, User Manual, Page: 160 / 348

6-2 Status Cue User’s Manual
Creating Sequences
To create a new Sequence, perform the following procedure:
1. Press <
SEQ
> in the OBJECT group, the LED will illuminate. Refer to Figure
6.1. Alternately, you may select Sequence from the Object drop-down menu.
Figure 6.1. OBJECT Group
2. Press the < NEW > key in the MEMORY group. Refer to Figure 6.2.
Alternately, select New from the Memory drop-down menu. A new unnamed
( NoName1 ) Sequence window appears listing the fixtures you configured in
Fixture Setup . The new Sequence window contains default transparent values
(indicated by blue). When transparent values are present, values from other
Sequences, Scenes, or Presets will show through and be outputted. Refer to
Figure 6.3.
Note: when transparent values are present, assigned (non-transparent) values from
the last active Scene, Sequence, or Presets will show through and be outputted
to the Stage Value(s). Turn off any active Presets and press the <CLEAR> key
in the SEQUENCE group to clear any hanging values from Scenes and
Sequences.
Figure 6.2. MEMORY Group