Lightwave Research Status Cue User Manual Download Page 278

Page: 278 / 348

A-20

Status Cue

User’s Manual

Encoder Tests

While performing encoder tests, the encoder’s output is displayed in the ROTATING
GOBO LEDs’ <

> through <

> (Figure A.10). Press the following keys with the hot key

to diagnose encoder functionality:

•

CLOSED

> in the STROBE RATE group (Figure A.11) displays the output of the

STROBE RATE

> encoder.

•

STROBE

> displays output of the <

FOCUS

> encoder (Figure A.11)

•

OPEN

> exits the encoder test.

Figure A.11 STROBE RATE and FOCUS Groups

•

POS

> in the ROTATE group (Figure A.12) allows the output of the <

GOBO RATE

to be displayed.

•

FWD

> in the ROTATE group allows the output of the <

ZOOM

> encoder (Figure

A.12) to be displayed in the ROTATING GOBO LEDs.

•

REV

> exits the encoder tests.

Figure A.12 ROTATE and ZOOM Groups

Summary of Contents for Status Cue





























































































































































































































































































































































Search results

Summary of Contents for Status Cue

Reviews:

Lightwave Research Status Cue, User Manual, Page: 278 / 348

Search results

Summary of Contents for Status Cue

Reviews: