Lightwave Research Status Cue, User Manual, Page: 111 / 348

Chapter 5 Scenes, Fixture Groups, and Palettes 5-7
5
Dim
Dim controls the light output of fixtures. To edit
Dim
, complete the following
procedure:
1. Select the desired fixture(s). Refer to "Selecting Fixtures" on page 5-5.
2. Set the
Dim
using the <
DIM
> wheel (Figure 5.6). Alternately, press the
<
DIM
> key in the CONSTRUCTS group (Figure 5.7) and then the <
AT
>
key in the SELECT group (Figure 5.4) to bring up the Set Dim At dialogue
box (Figure 5.8). Enter the desired value and click the
OK
button to
complete the procedure.
Note: the < AT > key can be used for any value that uses a percentage (%).
Figure 5.6. DIM Wheel
Figure 5.7. CONSTRUCTS Group