Lightwave Research Status Cue, User Manual, Page: 136 / 348

5-32 Status Cue User’s Manual
Frost, Frost Strobe, and Effect
The
Frost, Frost Strobe,
and
Effect
Constructs are used for frost diffusion, frost
strobing, and special effects (prisms, color correctors, etc.) on applicable fixtures.
To edit these Constructs, complete the following procedure.
1. Select the desired fixture(s).
2. Press the desired key above the <
EFFECT
> wheel. Refer to Figure 5.35.
Figure 5.35. EFFECT Group
Note: CC3 on older Consoles may indicate FROST instead of EFFECT.
3. Set the desired value using the <
EFFECT
> wheel (Figure 5.34).
Notes:
Frost
(percentage) can use the < AT > key to bring up the Set Construct At
dialogue box. The Frost Construct is tied to the <
FROST
> key in the
CONDTRUCTS group while both the <
F-STB
> and <
EFFECT
> keys and
their respective functions are tied to the < EFFECT > key in the
CONSTRUCTS group.