Lightwave Research Status Cue, User Manual, Page: 186 / 348

7-12 Status Cue User’s Manual
Construct Filter
The Construct Filter field allows Construct masking. The following options
are available in the
Construct Filter
field:
• Off - does not filter any Constructs (default)
•
Position
- allows only Pan, Tilt, and MSpeed Constructs to change in the
assigned output
•
Pattern
- allows only Gobo and Rotating Gobo Constructs to change in the
assigned output
•
Color
- allows only Color and Color Mixing Constructs to change in the
assigned output
•
Image
- allows only Focus and Zoom Constructs to change in the assigned
output
•
Effects
- allows only Frost and Effects Constructs to change in the assigned
output
•
Brightness
- allows only Dim, Iris, and Gate Constructs to change in the
assigned output
Example: Select a Fader Preset and set it to filter Position. Store a Scene with non-
transparent (active) values for every Construct including position. Set
the Scene to the fader Preset. Press the Fader key. Only the fixture(s)
positions will change.
Note: the same effect is achieved by creating a Scene with non-transparent values
for position while leaving all other values transparent.