Lightwave Research Status Cue User Manual Download Page 279

Page: 279 / 348

Appendix A

Installation Troubleshooting

A-21

•

FROST

> in the EFFECT ¹group allows the output of the <

EFFECT

> encoder to be

displayed.(Figure A.10).

•

F-STB

> in the EFFECT group allows the output of the <

IRIS

> encoder to be

displayed.

•

EFFECT

> exits the encoder test.

¹Note: older Consoles will have a "FROST" group instead of an "EFFECT" group.

Figure A.13 EFFECT and IRIS Groups

•

> in the MSPEED group (Figure A.14) enables the output of the <

MSPEED

encoder to be displayed.

•

> enables the output of the <

DIM>

encoder (Figure A.14) to be displayed.

•

> exits the encoder test.

Figure A.14 MSPEED and DIM Groups

Summary of Contents for Status Cue





























































































































































































































































































































































Search results

Summary of Contents for Status Cue

Reviews:

Lightwave Research Status Cue, User Manual, Page: 279 / 348

Search results

Summary of Contents for Status Cue

Reviews: