Lightwave Research Status Cue, User Manual, Page: 255 / 348

Chapter 10 Tips and Tricks 10-7
10
Flip Function
To speed programming, moving yoke fixtures can be flipped to provide an
additional range (degrees) of movement (avoiding stops). When a moving yoke
fixture, such as Studio Color is flipped, the unit pans 180° and tilts to the
opposite position of the 90° (straight down) axis and ends up pointing the same
direction. This allows more physical movement before a stop is reached. To flip a
fixture, complete the following procedure:
1. Open or create a Scene or Sequence with Blind mode off.
2. Select the desired moving yoke fixture(s). Refer to "Editing" on page 5-4.
3. Press the < FLIP > key in the FIXTURE group (Figure 10.8). The selected
fixture(s) will flip.
Notes: older Consoles may have a < PICK > key instead of a < FLIP > key. Alternately,
press the <PAN> or <TILT> keys in the TRACKBALL group to flip on the pan
or tilt.