Lightwave Research Status Cue, User Manual, Page: 148 / 348

5-44 Status Cue User’s Manual
Creating and Storing Fixture Groups
To store Fixture Groups, perform the following procedure:
1. Open or create a Scene or Sequence.
2. Select the fixtures to place in a group with the numeric keys in the
CONTROL group and the keys in the SELECT group. Refer to Figure
5.49.
Figure 5.49. CONTROL and SELECT Groups
3. Press the < GROUP > key in the FUNCTION group (Figure 5.50) twice.
The LED will remain on.
Note: alternately press the <GROUP> key once to place the Console in
one-shot mode. The LED will flash.
Figure 5.50. FUNCTION Group
4. If necessary, change to a different Bank. Refer to "Changing Banks" on
page 5-42.
5. Press the <
STORE
> key in the CONTROL group (Figure 5.46). This will
bring up the
Store a Fixture Group
dialogue box (Figure 5.51).