Lightwave Research Status Cue, User Manual, Page: 144 / 348

5-40 Status Cue User’s Manual
Playback
Scenes can be played back under live control and by using Presets. Use the
following subsections to playback Scenes and Sequences. Additionally, use the
<
M > fader and < BLACK > key (instant blackout) in the MASTER group to
override all Dim constructs.
Figure 5.44. MASTER GROUP
Live Control
Up to nine Scenes or Sequences may be open at any given point. But only
the active Scene will be sent to the Live output. To playback a Scene under
live control, complete the following procedure:
1. Recall the Scene(s) you wish to playback. The last Scene or Sequence
opened will take precedence over other Scenes and Sequences.
2. Turn Blind Mode off by pressing the <
BLIND
> key in the MEMORY
group. The LED will turn off and the Scene(s) are played through the live
channel on the Stack. Refer to "Viewing the Output Stack" on page B-9 for
additional information.
Note: if values from a previous Scene or Sequence (not in a Preset) are showing
through the transparencies, press the < CLEAR > key it the SONG group to
remove the hanging value(s).