Lightwave Research Status Cue, User Manual, Page: 118 / 348

5-14 Status Cue User’s Manual
Rate
Rate overall speed of the entire Sequence, thus the total time each Step of a
Sequence will play before advancing to the next Step. Rate is used as a multiplier.
You can specify rates from
0.01 x (fastest) to 127.98 x (slowest). Rates less than 1
x
speed up time advancement, while greater than
1 x
slow down the rate. Rate
effects the Delay value you set in a Scene.
Example 1: with
Rate
set to
1 x
and
Delay
set to 2 seconds, Scenes advance every
2 seconds. Set Rate to .5 x and Scenes advance every 1 second, and so
on. Refer to Figure 5.16.
Figure 5.16. Rate Diagram
Example 1: set Xfade to 5 Seconds, Delay to 5 Seconds, and Rate to 1 x on each
Step. The resulting Steps will Xfade for 5 seconds and Delay for 5
seconds.